Tinkercad Instructional Video Script

Hi, welcome to my instructional video on how to make a small tv in tinkercad!

First you are going to go to the “geometric” category and click on the red box. Then, you’re going to shrink it down to 10 mm in height.

Next, you will stretch it out to about 80 mm in length. Now, widen the shape until you see 80 mm. Then, click the shape and take your mouse to color under “Inspector” at the top, now select black.

Now, here’s where it get’s a bit complicated. Now you will click the shape and press “ctrl” and press “c” at the same time, which will copy the shape you just made. Now press “ctrl” and “v”. This will paste the shape, and now you’ll have two of the same shapes.

Rotate the second shape until it sits at a “90 degree” angle. Now, drag the shape up so it overlaps the first shape. Then, press “ctrl” and “v”, another shape will appear, drag this to the side across from the overlapping shape.

Make sure it’s even with the shape across. Now, click the shape you just placed and press “ctrl c” then press “ctrl v”. Drag the shape between the two last two shapes you placed. Turn the shape until it’s at a 90 degree angle and then click color and change the shape to white. Inspect both sides of the standing black shapes to see if you see any white piercing through them. If so then click the white shape and hold shift, then drag the shape down until you see “75 mm”. Now, move the shape to the very edge of the middle shape lying beneath it.

Now turn you screen so you can see the back of all of these shapes, go over to the “geometric” column and click the box. Place the box between the black wall shapes.

Now hold shift and drag the shape up into you see “70 mm” Now turn your screen to the front of the shapes, and go over to the geometric column again, click “box”.

Bring the box in front of the shape, then drag it up until it is  “20 mm” off the ground. Then, stretch the shape length to about “25 mm” Now make the length “65 mm”, click color and make the shape black. Turn the screen to the side of the shapes, make sure you can’t see the top of the screen (white shape) from that angle, now turn the screen back to the center. You now have a tv!

Reflection:

6 word memoir: Nothing matters except money and Basketball.

Backstory: Brian Bess 15x NBA  All-star,8x Most Valuable Player, 4x defensive player of the year, 2021 Rookie of the year and future NBA Hall of famer. He has stacks of money around in duffle bags, expensive furniture, a 70 inch Flat screen Television and a ten foot tall Basketball court in his room. He wanted to be the greatest basketball player of all time. He aspired to live a luxurious and great life and has finally succeeded.

Lost family.Gained friendships.Life happens.

This is project is one that I started in the 2nd quarter I Realized that the school doesn't have anything from the seniors starting class as far as artwork goes so I created this piece below based off of the student bodies and my own opinion on the school and life.

This project was one I did in the first quarter I wanted to do a painting because I always draw and I wanted to see how skilled I could be with a paint brush. I wanted a symbolic mother earth in my piece and a Clift the entire piece was based around the idea of having a clift the piece was supposed to

As an artist I don't think I have grown too much. I haven't pushed my artistic skill I just did something different through each quarter. I knew exactly what I was doing with the art and just executed, it was pretty easy.

I have learned that as far as the research goes I don’t have any drive to be consistent with the research. And it would be easier for me to just tell you why I did what I made

• “What have you learned about making Art?”

I haven’t learned much about art this year tbh I was mainly experimenting with different ideas and cultivating the skill set I already possessed and based my pieces around an Idea I had. I’d go as far as to saying I challenged myself with certain aspects of my creation.

• “What have you learned about yourself through the projects you have created?”

I learn that I can be versatile with the equipment I use for creative purposes. All I really need is to have the right teacher and a few classes to master the skill and work things out visually and inside of my head as far as the techniques I gather for my art work.

• Which project are you most proud of and why?

• This should include an image of the project

I like the painting because it came out nearly like the way I wanted it too even though the original idea was more complex and might have looked better I enjoy the Pieces simpleness.

• What is your biggest weakness or area in need of growth has been this year?

I biggest weaknesses I think are the fact that I shade pretty horrifically and I have a hard time scaling images up freehand, it always comes out too small or too big or things become disproportionate.

• What kind of Art you want to make next.

Most likely a 3D model of something or I’d try different styles of drawing and paining because there's sooo much I have to learn from each art form. Maybe spray painting or really anything.

• What kind of Art inspires you the most and why (MUST include a copyright free/Creative Commons licensed image and a citation for that image)